Conduit and Conduit Swaged Fittings
Light Duty Pull Cable Conduit and Fittings
Bowden Conduit |
 |
| Conduit
Size |
Part
Number |
O.D. |
I.D.
Min. |
Cover
OD |
Cover
Type |
Liner Type |
Max Cable Dia. |
| 3/16" |
CB-190 |
.188" |
.080" |
N/A |
NONE |
None |
1/16" |
CL-190 |
N/A |
NONE |
HDPE |
CL-190B |
.218" |
HDPE |
CL-190C |
.218" |
PVC |
CL-190SST |
.218" |
PTFE |
TFE |
CL-190SV |
.218" |
PVC |
* CL-190SST and CL-190SSV are stainless steel |
|
| Threaded Conduit Fittings for 3/16" Conduit |
| Part No. |
Stainless Steel or
Zinc Plated Carbon Steel |
| CL-190-.25-28 |
 |
| 100680-2 |
 |
|
| Part No. |
Stainless Steel or
Zinc Plated Carbon Steel |
| CL-190-10mm |
 |
| CL-190-6mm |
|
|
| Pull Knob with Bulkhead Fittings for 3/16" Conduit |
| Part No. |
Stainless Steel or
Zinc Plated Carbon Steel |
| PULL-1.37 |
|
 |
|
| Part No. |
Stainless Steel or
Zinc Plated Carbon Steel |
| PULL-.50 |
 |
|
| Conduit Fittings for Retainer or E-Ring |
3/16" Conduit End Cap Fitting |
| Part No. |
Stainless Steel or
Zinc Plated Carbon Steel |
| A80T005-001 |
 |
Use Retaining Ring for 1/4" Shaft |
|
| Part No. |
Stainless Steel or
Zinc Plated Carbon Steel |
| CAP-511 |
 |
|
Common-core cable fittings used with our l3/16" light duty conduits include "L" fittings, "Z" fittings, balls, stops, studs and eyelets. Please see those sections of this Web Site for dimensional information for those fittings.
Conduits shown within this Cable Conduit and Fittings section are available on completed assemblies only. Many product configurations (other than those shown) are available, please contact our sales and customer service department with your special requirements. |
|
Medium Duty Pull Cable Conduit and Fittings
Conduit
| Part No. |
Suitable for use with 1/8" strand or cable |
Fittings for A-223 Conduit are furnished in plated carbon steel only. If you have applications requiring all corrosive-resistant materials, please contact our customer service department. |
| Conduit A-223 |
|
 |
| Conduit Stud |
Conduit Snap Ring Fitting |
| Part No. |
Plated Carbon Steel |
| A223-1/2-20 |
 |
| A223-2 |
 |
|
| Part No. |
Plated Carbon Steel |
| A223-1 |
|
 |
Use with E-Retaining Clip, McMaster Carr Part No. 97431A340 |
|
Common-core cable fittings used with our A223 medium duty conduits include Balls, Stops, Studs, eyelets, aircraft forks, aircraft eyes. Please see those sections of this Web Site for dimensional information for those fittings.
Conduits shown within this Cable Conduit and Fittings section are available on completed assemblies only. Many product configurations (other than those shown) are available, please contact our sales and customer service department with your special requirements. |
|
